Logo

Hynautic Sterndrive Steering

STERNDRIVE STEERING
15° SWIVEL MAX.
2.7"
(69mm)
4.5"
(114mm)
0 .875" (22.5mm)
20.75" (527mm) RETRACTED
20.12" (511mm) RETRACTED
15° SWIVEL MAX.
The K-5-B cylinder was designed for inboard/outboard boats requiring
external cylinders of substantial size and strength. The K-5 cylinders
are nickel plated for aesthetics and protection against the elements.
This cylinder does not include the wing plates or hardware required
for mounting to the outdrive. Porting is through two through-transom
1/4" NPT ports located at the mounting end of the cylinder.
Performance I/O and
Outboard Cylinders
BORE STROKE DISP EXT. DISP RET.
1.5" (38mm) 9" (229mm) 15.9cu in 10.5cu in
NOTICE
K-5-B steering cylinders have a large volume. To keep total wheel
turns at a reasonable amount, it is recommended to use a larger
displacement helm pump, such as Capilano HH5275 (5.4 cu.in.
displacement MAX).
NOTICE
K-5 Cylinders are UN-balanced Cylinders, unequal
amount of fluid on either side of the piston.
NOTICE
DO NOT use a PRO Helm pump with this, or any other
unbalanced steering cylinder.
NOTICE
SeaStar Solutions does NOT make connecting hard-
ware to attach this cylinder to the out drive.
5-7
SEASTAR and BAYSTAR Hydraulic Steering Systems