Logo

SeaStar Sterndrive Steering: General Dimensions

5-4
Selection Guide
General Dimensions
HC5328-3 125-8EM
22" (559mm) MAXIMUM
MASTRY ENGINE PART # SUN144
*Not provided by SeaStar Solutions
PART # HA5424
CYLINDER CONNECTION
DETAIL FOR OMC
TRANSOM MOUNT
(PROVIDED BY ENGINE
MANUFACTURER)
HC5328-3 = 17-1⁄4" (438mm) MAX.
SUPPORT TUBE & DRAG LINK PROVIDED
BY ENGINE MANUFACTURER
INSTALLATION NOTICE
31" OF SPACE REQUIRED FROM END OF SUPPORT TUBE
TO ALLOW INSTALLATION OF STEERING CYLINDER
9" (228mm)
HC5326-3 BA150-7EM
12.08" (306.86 mm)
0.625" (15.88 mm)
8.85" (224.79 mm) 12.5" (317.5 mm)
0.25"
(6.35 mm)
1.625" (41.28 mm)
5" (127mm) REQUIRED FOR
UNRESTRICTED MOUNTING
HC5332 BA135-6.88EM
STERNDRIVE STEERING
NOTICE
If engine outdrive is NOT equipped with a
torque tab on underside of lower leg, one
must be installed to reduce prop torque.
NOTICE
DO NOT use a PRO Helm pump with this,
or any other unbalanced steering cylinder.
DO NOT attempt to install NPT pipe fittings into the cylinder hose
fitting ports on any -3 model cylinder. Doing so will lead to irreparable
damage to the cylinder. ONLY use ORB hose fittings provided by
SeaStar Solutions.
CAUTION
Due to cylinder body movement
during steering, this cylinder requires
use of SeaStar outboard hose
(HO51xx), see page9-2 for details.
CAUTION