Logo

SeaStar Outboard Front Mount: Installation Recommendations

SEASTAR and BAYSTAR Hydraulic Steering Systems
3-3
ENGINE SEASTAR TOURNAMENT SERIES SEASTAR FRONT MOUNT HYNAUTIC K-6
(See Note 1 Refer to page 3-7 through (Refer to page 3-4 through page 3-6) (Normal Use ONLY
page 3-13) Refer to page 3-21)
SINGLE ENGINE SINGLE CYLINDER SINGLE CYLINDER SINGLE CYLINDER
350 HP Max 350 HP Max 300 HP Max
HC63xx-3 Pro Cylinder page 3-7 through 75 MPH Max 55 MPH Max
page 3-9 (See Notes 2 & 3) or HC53xx-3 Cylinder (See Note 2)
HC6845S (See page 3-11)
DUAL ENGINE SINGLE CYLINDER SINGLE CYLINDER SINGLE CYLINDER
NON COUNTER Tournament Cylinders 450 HP Max 400 HP Max
ROTATING (See page 3-10 through page 3-13) 55 MPH Max 55 MPH Max
HC53xx-3 Cylinder
HO60xx Tie Bar
DUAL CYLINDER DUAL CYLINDER DUAL CYLINDER
Tournament Cylinders 600 HP Max 500 HP Max
See page 3-10 through page 3-13) HC53xx-3 Cylinders 55 MPH Max
HO60xx Tie Bar
DUAL ENGINE SINGLE CYLINDER SINGLE CYLINDER SINGLE CYLINDER
COUNTER ROTATING Tournament Cylinders 600 HP Max 500 HP Max
(See page 3-10 through page 3-13) 55 MPH Max 55 MPH Max
HC53xx-3 Cylinder
HO60xx Tie Bar
DUAL CYLINDER DUAL CYLINDER DUAL CYLINDER
Tournament Cylinders 600 HP Max 500 HP Max
(See page 3-10 through page 3-13) 55 MPH Max 55 MPH Max
HC53xx-3 Cylinders
HO60xx Tie Bar
TRIPLE ENGINE DUAL CYLINDER DUAL CYLINDER NOT RECOMMENDED
ONE WITH COUNTER Tournament Cylinders 600 HP Max
ROTATING (See page 3-10 through page 3-13) 55 MPH Max
HC53xx-3 Cylinders
HO60xx Tie Bar
*MAX center engine drop <.75"
Consult SeaStar Solutions TRIPLE CYLINDER Consult SeaStar
Technical Service 900 HP Max Solutions Technical
55 MPH Max Service
HC53xx-3 Cylinders
HO60xx Tie Bar
*MAX center engine drop <.75"
OUTBOARD–FRONT MOUNT
Front Mount Outboard Installation
Recommendations
Outboard recommendations made in this section are
based on our experience with typical installations,
applications and usage. Ensure you select the system
which provides the best comfort versus performance.
It is the boat manufacturer and the
installer's
responsibility to ensure the components selected
are sufficiently validated on the boat for safe and
acceptable operation. DO NOT use SeaStar Solutions
Steering in applications they are not intended for.
1.
SeaStar Solutions has specific steering equipment for boats that are driven
aggressively, used in severe conditions or with more than 300 HP per engine.
2. ALL ENGINES over 300 HP and all boats that are driven aggressively must
use a high strength tiller bolt, kit part # HA5822. All front mount cylinders built
after June 15, 2007 will have this high strength bolt included in the box. High
strength tiller bolts can be identified by the marking “SEASTAR ARP” on the
head of the bolt (refer to NOTICE page 3-5).
3. HC63xx PRO Cylinders are designed for all those critical high speed, single
outboard engine boats, such as Bass, Flats combo Race/Ski and other
performance orientated boats capable of speeds in excess of 65 mph. For
optimal performance, the use of SeaStar PRO helms and PRO Hoses are
recommended.
AGGRESSIVE USE (SEE NOTE 1)
NORMAL USE