Logo

BayStar Outboard Steering Kits

1-4
Selection Guide
BayStar Steering Kits
PID# HK4200A-3,
BayStar Steering kits come complete with everything needed for an
install, (some engines require additional kits and/or cylinder plate change,
see application chart on page 1-5) the cylinder does not require the
engine manufacturer drag link for connection. For your convenience
two lengths of 20' cut to fit tubing are supplied with the HK4200A and
two lengths of 30' cut to fit tubing are supplied with the HK4230A kit.
OUTBOARD–FRONT MOUNT
Effort Reduction — SeaStar Solutions has recently updated the
BayStar
cylinder. These updates include low friction main piston seals
as well as
low friction wiper and gland seals. If one chooses to further
reduce steering effort, the following additional changes can be made:
Consider plumbing the system using SeaStar Steering hoses. See
page 9-2.
Consider use of a BayStar Plus 1.4 cu.in. helm pump (HH4513-3/
.
Consider use of a BayStar 1.1 cu.in. helm pump (HH4311-3).
NOTE: Number of wheel turns will increase to 6.6 hard over to hard over.
NOTICE
NOTICE
BayStar Steering Kit (HK4200A)
Includes:
1 x BayStar helm pump (HH4314-3)
1 x BayStar Cylinder (HC4645H)
1 x BayStar Tubing kit (HT4420H, comes with two 20' hoses)
2 x Hydraulic Steering Fluid (HA5430)
1 x Filler Kit (HA5438)
BayStar Steering Kit (HK4230A)
includes:
1 x BayStar helm pump (HH4314-3)
1 x BayStar Cylinder (HC4645H)
1 x BayStar Tubing kit (HT4430H, comes with two 30’ hoses)
2 x Hydraulic Steering Fluid (HA5430)
1 x Filler Kit (HA5438)
HC4645H compact cylinder is
included in both BayStar Steering
Kits. If your engine requires the
use of a cylinder other than
HC4645H or HC4658H (refer to
application guide on page 1-5)
then purchase of a replacement
Pivot Plate (noted on page 1-5)
will be required.
BAYSTAR SYSTEM (PRE SEPT. 2010) – TUBE
20%
20%
2%
10%
BAYSTAR UPDATED CYLINDER – TUBE
BAYSTAR SYSTEM – HOSE
BAYSTAR PLUS HELM – TUBE
BAYSTAR
PLUS HELM HOSE
SEASTAR SYSTEM
PRODUCT
LOWER HIGHEREFFORT