| Author |
Message |
    
Bill Crane
| | Posted on Tuesday, January 08, 2002 - 05:54 pm: | 
|
I am looking for parts & information for an old MD 17. One of my customers has this engine in his boat. It is a salt water cooled model with an aftermarket heat exchanger conversion to fresh water cooling. The engine runs fine with the exception of exhausting blue smoke & residual deisel fuel. I think that it may be that the thermostat is the original for salt water cooling which opens at 140 degrees. Is there a thermostat which opens at 180 degrees to replace the original that will allow the engine to run a litter warmer & burn this residual fuel & hopefully eliminate or reduce the blue smoke? Please pass this message on to the 'powers that be' in the service 7 parts department - Thank you, wacraneacfob@aol.com |
KEN MOORE
| | Posted on Thursday, November 07, 2002 - 01:49 pm: |
|
I AM LOOKING FOR ANY PARTS TO MARINEISE A BMC DIESEL MOTOR,ie JAPSCO MACANICAL WATER PUMP,HEAT EXCHANGER MANIFOLD,MARINE G/BOX ECT ECT.ANY INFO WELCOME |
HenkW
| | Posted on Wednesday, November 20, 2002 - 02:16 pm: |
|
Anyone,
i am searching for any information ( manual and/or technical information ) about ARONA AD-type engine.
I bought the engine without even knowing it's rotation direction. |
Andrew (Andrew)
| | Posted on Wednesday, November 20, 2002 - 05:10 pm: |
|
HenkW,
Click on the "keyword search" link on the left, and then enter "arona" into the search box. We have had various discussions here before about sources of parts and information for those engines.
Regards,
Andrew |
KEN MOORE
| | Posted on Friday, November 22, 2002 - 07:09 pm: |
|
CAN ANYONE PLEASE TELL ME WHERE TO SOURCE BMC 2.2
SPARES,MANY THANKS
KEN |
maurice
| | Posted on Friday, February 21, 2003 - 03:26 pm: |
|
I am looking to locate somebody who would have sleeve, piston and rings for a diesel motor Farymann k30m.
So I am looking to locate a dealer who sell those parts or would somebody have thoses pieces used in good condition...Thanks Maurice
jaugr@sympatico.ca |
Andrew (Andrew)
| | Posted on Friday, February 21, 2003 - 03:43 pm: |
|
Maurice,
Here are some links for Farymann.
You could get the same links by typing "Farymann" in the search box on our home page.
You could also post a wanted ad in our classifieds
Regards,
Andrew |
William Walker
| | Posted on Tuesday, April 01, 2003 - 10:24 pm: |
|
BUKH DIESEL MOdel:DV10 S/No:206446
Need "GOOD" used cylinder head for DV10--
Part No: 000D8144. To replace current cracked head.
Will consider new part at "marine trade " cost.
Engine located Florida.Anxious to learn if available.Please email replies. April 1,2003 |
Ron Cairns
| | Posted on Friday, July 18, 2003 - 08:24 pm: |
|
Sidney Propeller has been sevicing Farymanns for over 30 years, give Willie a call 250-656-3421 |
Ian Murdock
| | Posted on Wednesday, August 20, 2003 - 06:15 am: |
|
I have a Perkins 499 that I have been overhauling.I have done the head and all bearings in the lower end. 90% finished. I have now aquired another engine for my 18ft boat and now have this unwanted one. anyone interested? |
Ivan Osmond
| | Posted on Saturday, August 23, 2003 - 10:39 am: |
|
Hi:
Does anyone know where I might be able to get a thermostat housing for a Volvo Penta MD5A diesel engine? |
Fiona1912 (Fiona1912)
| | Posted on Friday, August 29, 2003 - 04:29 pm: |
|
We´d like to purchase a complete Graymarine Diesel Model Four-D-129 or starter for same engine.
The starter number is Delco-Remy Model 1108247
Thanks, Don Burns |
coyote
| | Posted on Monday, November 03, 2003 - 01:16 pm: |
|
I'm looking for an oil pan for a Cat.3208T. Part #8N1651. Must be rust free. |
glass man
| | Posted on Saturday, January 24, 2004 - 10:13 pm: |
|
I am looking for a used heatexchanger for a 3208 natural caterpiller |
glass man
| | Posted on Saturday, January 24, 2004 - 10:13 pm: |
|
I am looking for a used heatexchanger for a 3208 natural caterpiller |
Bill Sillery
| | Posted on Monday, January 26, 2004 - 02:18 pm: |
|
I'm looking for head gasket and radiator cap for a Buda-Lanuva diesel engine Model #6-dt-468.This engine is in a Austin/western road grader. |
John Henly
| | Posted on Tuesday, February 10, 2004 - 03:18 am: |
|
Looking for parts or rebuilt motor for Renault Marine diesel RC8D, single cyl, 8HP. |
Frank Ingebrigtsen
| | Posted on Thursday, April 08, 2004 - 04:00 am: |
|
Looking for parts for GM Bedford 500 diesel engine. |
Lonnie
| | Posted on Sunday, April 11, 2004 - 05:20 am: |
|
Looking for any parts on Detroit diesel 8V53N marine. Need heat exchangers, manifolds (wet Exhaust) thanks |
Lonnie
| | Posted on Sunday, April 11, 2004 - 05:20 am: |
|
Looking for any parts on Detroit diesel 8V53N marine. Need heat exchangers, manifolds (wet Exhaust) thanks Ltiran44@aol.com |
pmhoward
| | Posted on Tuesday, April 13, 2004 - 10:08 am: |
|
I am looking for a technical manual for cat. 3106TA's. Recently reengined with rebuilds and have no idea or operating requirements. Where can tech. manuals be found? |
john armbruster
| | Posted on Saturday, May 01, 2004 - 12:02 pm: |
|
john armbruster
iam looking for guages for my 1968 super 300 austin western road grader. also a front blade and a side blade. and a manual for my recently bought machine. |
Pero Kmetovic
Visitor
| | Posted on Thursday, January 19, 2006 - 02:10 pm: |
|
i am looking for water cooled exhaust manifolds and elbows for cat 3208 natural asp. |
Thomas A. Johnson
New member
Username: thomas_johnson
Post Number: 1
Registered: 04-2006
| | Posted on Monday, April 24, 2006 - 10:50 pm: |
|
looking for delco 6 volt pos grd regulator for my 56 graymarine powered century resorter |
jarvis sameluk
New member
Username: jarvis
Post Number: 3
Registered: 03-2007
| | Posted on Sunday, April 01, 2007 - 12:12 pm: |
|
Looking for parts for a TAMD70C-VOLVO PENTA DIESEL heatexchanger,Flameglowplug,506-twin disc reverse gear etc. |
jarvis sameluk
Member
Username: jarvis
Post Number: 4
Registered: 03-2007
| | Posted on Sunday, April 01, 2007 - 01:19 pm: |
|
Wanted:Wet manifold for a 272 C.I. 4 cylinder ford industrial diesel engine |
