| Author |
Message |
    
Patrick O'Gorman
New member
Username: pat_og
Post Number: 1
Registered: 11-2006
| | Posted on Sunday, November 05, 2006 - 10:23 am: | 
|
Can anybody help?
I recently bought a MAC outboard with a tag giving the following info.
Type- TA636/FAA12 and no. 4540851.
I would like to know what HP this is and if I can get a workshop manual for it.
Thanks for looking
Pat |
Ken Denman
Member
Username: ken_denman
Post Number: 75
Registered: 07-2006
| | Posted on Monday, November 06, 2006 - 01:48 pm: |
|
That's quite a rare find you have. It's probably the MAC 10, based on the Sachs wankel powerhead. Mac went under in '74 -- not many motors left the factory. You may have some luck by going for some Sachs resources.
If you ever plan to run the motor, find a source for the rotor seals -- those are the number one wear item. |
Patrick O'Gorman
Member
Username: pat_og
Post Number: 6
Registered: 11-2006
| | Posted on Friday, November 10, 2006 - 02:28 am: |
|
Thanks Ken. That gives a place to start |
rar
New member
Username: rar
Post Number: 1
Registered: 09-2008
| | Posted on Friday, September 05, 2008 - 07:55 pm: |
|
I have an 82 Evinrude 25hp outboard. Misfire on both cylinders. There is water getting into the cylinders somehow. Pulled head, water still getting into the cylinder with head off. Does anyone know where it would possibly come from? |
Collector Inspector
New member
Username: collector_inspector
Post Number: 2
Registered: 04-2009
| | Posted on Tuesday, June 09, 2009 - 06:10 am: |
|
I have a new old stock one complete with tank and paperwork if interested in getting info.
http://www.youtube.com/watch?v=izaxqIksvpI
Regards
C.I.} |
