|
| Author |
Message |
    
Tim Sveen
New member
Username: ts7424
Post Number: 1
Registered: 07-2009
| | Posted on Monday, July 20, 2009 - 02:41 pm: | 
|
I have a 1972 9.6hp seaking VWB27209 by wards, looking for a lower end seal kit
Is this the same motor as a 1972 Chrysler 9.9hp ?
will a FK-1065 seal kit work? |
william g moore jr
Advanced Member
Username: william_m
Post Number: 344
Registered: 05-2009
| | Posted on Monday, July 20, 2009 - 09:14 pm: |
|
Without seeing everything, I would say yes as chrysler hated to change anything. I've been working them since 1976 and only ever saw one style early low profile chrysler lower unit. They messed with the mid range and the big ones, but your pretty safe here.
If you post in "CHRYSLER", Gramn may have the model break down for you, he has quite a library. |
Tim Sveen
New member
Username: ts7424
Post Number: 2
Registered: 07-2009
| | Posted on Monday, July 20, 2009 - 10:06 pm: |
|
 Thank you, I will. |
john rocks!
Member
Username: ilovetofish
Post Number: 22
Registered: 09-2009
| | Posted on Wednesday, September 16, 2009 - 09:27 am: |
|
Look at the chart to see if your model is a Chryler. It may be a Gale too?
This is the best place to find out info on old SeaKing motors. Click on link, then select your brand on the left side. You can find out more about your model at this site. Repair manuals are available at this site too...
http://www.discount-marine-parts.com
http://www.discount-marine-parts.com
Try Evinrude or Johnson parts too! They work with this motor.Don't ask shops for SeaKing parts, they;ll look at you crosseyed. Ask for parts from Evinrude and Johnson that are comparable. You may have to take the part in to get a perfect fit. |
|
|
