| Author |
Message |
    
Kevin Baker
New member
Username: kvnbakeman
Post Number: 1
Registered: 12-2008
| | Posted on Tuesday, December 30, 2008 - 11:08 pm: | 
|
I recently purchased a 7.5 horse sea king
Model k7515106b
Serial 1383827
xtv50575
Can anyone tell me the year of this engine and where I could find parts. It runs as of now but im going to clean the carb, any suggestions on what to replace now? Thanks |
Tim Kellay
Member
Username: tim_k
Post Number: 20
Registered: 10-2008
| | Posted on Monday, January 26, 2009 - 09:26 pm: |
|
Made by Clinton 1978. Can't tell you much more. |
Kevin Baker
New member
Username: kvnbakeman
Post Number: 2
Registered: 12-2008
| | Posted on Monday, January 26, 2009 - 09:28 pm: |
|
Thanks, anything helps, haha |
Graham Lamb
Senior Member
Username: galamb
Post Number: 4447
Registered: 05-2007
| | Posted on Wednesday, January 28, 2009 - 05:10 am: |
|
You can probably get parts from www.twincityoutboards.com - they are a recycler and have just about everything, but can be a little pricey.
I think I have an original owners manual/parts list for that model (pdf format) - will have a look and can email it to ya if I do... |
ron stone
New member
Username: rons
Post Number: 1
Registered: 02-2009
| | Posted on Tuesday, February 03, 2009 - 02:17 pm: |
|
i have a sea king model#94gg9014a where the heck is the shifter or is there one and can u tell me what yr im thinging around 1949 to 50 thanks ron |
Graham Lamb
Senior Member
Username: galamb
Post Number: 4469
Registered: 05-2007
| | Posted on Wednesday, February 04, 2009 - 12:40 am: |
|
Ron, you have the year correct - it is a 1949/50, twin cylinder 5 horse built by Gale (OMC) for Montgomery Wards.
The equivalent Gale branded model was 2W7.
Sorry, I don't have manuals reaching back that far for this particular model, but it's quite possible that your motor does not have "shiftable" gears. It was fairly common to find (direct drive) small outboards which are "always" in forward gear.
You can most probably get an answer to that question if you ask at www.aomci.org |
STAN JENSEN
New member
Username: stan_jensen
Post Number: 1
Registered: 02-2009
| | Posted on Tuesday, February 17, 2009 - 06:25 pm: |
|
HI I HAVE A 15 HORSE SEA KING BY CHRYSLER SOLD BY MONTGOMERY WARDS
MOD#VWB52119B
SER#18X 23699 DO YOU KNOW THE YR? AND WHERE CAN I CAN GET A MANUAL AND PARTS. I NEED A PINION GEAR- ARE THEY TRICKY TO PUT IN?
THANKS FOR ANY HELP YOU CAN GIVE ME
STAN |
Gene W Irgang
New member
Username: montanagold9928
Post Number: 1
Registered: 07-2009
| | Posted on Thursday, July 23, 2009 - 01:31 am: |
|
have a 63 40 hp sea king model gg18805a has trouble staying in gear at start up when it gets going it stays in gear reverse stopped engaging is there a adjustment that can be made or do i have lower end problems to repair. |
Gene W Irgang
New member
Username: montanagold9928
Post Number: 2
Registered: 07-2009
| | Posted on Thursday, July 23, 2009 - 08:09 pm: |
|
took my 1963 40hp sea king out to the lake today stuck in reverse need to know were to take it apart to see what is broke. |
MIKE MALONE
New member
Username: firemike30
Post Number: 1
Registered: 08-2009
| | Posted on Friday, August 28, 2009 - 08:39 pm: |
|
i have a 1956 seaking 12 horse i need head gasket and leaf plate gaskets can someone please help thanks |
john rocks!
Member
Username: ilovetofish
Post Number: 8
Registered: 09-2009
| | Posted on Wednesday, September 16, 2009 - 09:17 am: |
|
This is the best place to find out info on old motors. Click on link, then select your brand on the left side.
http://www.discount-marine-parts.com
http://www.discount-marine-parts.com |
