| Author |
Message |
    
Steven R. Hilpisch
Member
Username: shilpisch
Post Number: 45
Registered: 06-2006
| | Posted on Wednesday, December 03, 2008 - 06:47 pm: | 
|
I am looking for the following parts. Pictures will follow.
Carb Inlet Housing (FM-420)
Generator
Fuel Pump
Hose Clamps |
Steven R. Hilpisch
Member
Username: shilpisch
Post Number: 46
Registered: 06-2006
| | Posted on Wednesday, December 03, 2008 - 06:58 pm: |
|
Carb Inlet Housing - Part Number FM-420
Generator
Fuel Pump
1.5" Inside Diameter Corbin Spring Clips (Hose Clamps) - Oringinal Part Numbers E20 or E18
 |
Steven R. Hilpisch
Member
Username: shilpisch
Post Number: 48
Registered: 06-2006
| | Posted on Thursday, December 04, 2008 - 09:07 pm: |
|
2 Carter YH Carbs
As seen mounted to the intake in the picture below.
 |
Steven R. Hilpisch
Member
Username: shilpisch
Post Number: 49
Registered: 06-2006
| | Posted on Saturday, December 06, 2008 - 02:40 pm: |
|
If anyone has one i would also be interested in a 14RH17 (3 blade) prop for a 1 inch shaft. |
John Jeffrey
New member
Username: johndjeffrey
Post Number: 1
Registered: 12-2008
| | Posted on Saturday, December 20, 2008 - 07:52 pm: |
|
Steve- I think I have what you need. Give a list and I'll see if I have it. I know off the top of my head that I have two complete intake manifolds/carbs etc.
Contact: johndjeffrey@yahoo.com
Regards,
John |
Steven R. Hilpisch
Member
Username: shilpisch
Post Number: 53
Registered: 06-2006
| | Posted on Tuesday, February 10, 2009 - 03:28 pm: |
|
John,
I have sent you several email but never recieved a responce. Please email me at shilpisch@sbcglobal.net and let me know what items you have and what price you are asking.
Thanks,
Steve |
James E. Harris
Member
Username: engineguy68
Post Number: 4
Registered: 03-2009
| | Posted on Wednesday, March 04, 2009 - 12:39 am: |
|
Steve, do you need a normal or reverse rotation generator, and do you need 6 volt Pos ground or 12 volt Neg Ground. |
