| Author |
Message |
    
Guido
| | Posted on Saturday, October 26, 2002 - 12:50 am: | 
|
Chrysler/Mitsubishi CM655NA marine diesel engine 130 HP. I would like to learn general opinions of owners & mechanics of this engine. How common they are,how long it has been out of prodution, reliabilty, typical known chronic problems, who are sources of parts in the USA etc. Any information is highly appreciated. |
Andrew (Andrew)
| | Posted on Saturday, October 26, 2002 - 09:56 am: |
|
Guido,
Hopefully someone can offer you some first hand information on that engine...
We do offer Service and Parts manuals for it if you need them.
I have been told that Blue Ridge Marina works on those engines... but the two times I called them about it they never returned my call. Their number is 800-621-2215.
Regards,
Andrew |
littletug
| | Posted on Wednesday, November 06, 2002 - 11:21 pm: |
|
Keith at Blue Ridge has been very helpful to me. I own four cm-655s and one 4ds50. These engines were used extensively as agricultural engines 6ds7 (block) The run great as long as you do not overheat them. I am very happy with them. Three are wet turbos and one is natural. Many bayliner 38 footers have these engines. THey were available through the later 80's. outlet flange on turbo is a problem. They have been good to me. Good Luck |
LAURENT
Visitor
| | Posted on Friday, September 29, 2006 - 09:30 am: |
|
I HAVE A MITSUBISHI 6DS7 CHRYSLER DIESEL ON MY BOAT AND I AM LOOKING FOR THE ENGINE MANUAL AND ALSO FOR PARTS; COULD ANYONE HELP ME PLEASE |
mteegarden
Visitor
| | Posted on Tuesday, November 07, 2006 - 09:17 am: |
|
I work for a Mitsubishi distributor and have emailed Mitsubishi direct about this engine. The information provided will most likely be the Chrysler information not the mitsubishi model. If you look under the injection lines or around the injection pump area you will find it casted in the block. I will update this when I get more infromation from Mitsubishi as to what engine they used for this build.
www.kraftpower.com |
mteegarden
Visitor
| | Posted on Tuesday, November 07, 2006 - 09:36 am: |
|
I do have a parts manual for a 6DS70 mitsu. It is for the Chrysler build.
What parts are you looking for.
You can contact me via email or 800-394-0078
mteegarden@kraftpower.com
www.kraftpower.com |
Matt Herrick
Visitor
| | Posted on Thursday, August 23, 2007 - 12:13 pm: |
|
I am looking for an exhaust manifold for a CM655NA Chrysler-Mitsu. Does anybody know where to look? |
McGrane
New member
Username: mcgpm
Post Number: 1
Registered: 09-2009
| | Posted on Monday, September 14, 2009 - 04:27 pm: |
|
I am looking for a raw water pump for a CM655. actually I need two. If impossible does anyknow how they can be fixed? |
Frederick Pel
Member
Username: coaster
Post Number: 91
Registered: 09-2008
| | Posted on Friday, November 06, 2009 - 07:01 am: |
|
Try Parts Supply Corporation |
Frederick Pel
Member
Username: coaster
Post Number: 92
Registered: 09-2008
| | Posted on Friday, November 06, 2009 - 07:07 am: |
|
Chrysler /nissan is the key. |
McGrane
New member
Username: mcgpm
Post Number: 2
Registered: 09-2009
| | Posted on Tuesday, November 10, 2009 - 10:29 am: |
|
I have two CM655 engines, 130 HP, non-turbo. Have them on a Hatteras DC 41' and they have run very well for me. You may want to look at the injectors. Pull one or two (it's pretty easy) go to any diesel shop for their inspection. If they are dirty and it has been a while since done last, you may want to go ahead and get them all serviced. It will be about $50 an injector if you pull them yourself. I have also replaced the hand pump.
I have also worked with Blue Ridge. I was happy with their work and Keith was also helpful to me. Be a little careful when dealing with them. Keith is a sales guy first and may try to tend to push unnecessary work at you.
There is also a place in Long Island, NY that sells parts for the 655s. I think it is called Lighthouse Marine. They are easy to work with. |
