|
| 4.108/Delco Starter question |
| Author |
Message |
    
crzhors
Member
Username: crzhors
Post Number: 24
Registered: 09-2006
| | Posted on Friday, February 22, 2008 - 01:30 pm: | 
|
Hello, I've just removed a 12 tooth DelcoRemy starter from a 4.108.It uses a 1 inch thick adaptor.The part number on the starter is
#1109214. Can anyone shed some light on this application? Will this take the place of the Evil old inertial style 13tooth unit?
I'd love to get to the bottom of this 4.108
starter replacement issue.And Where can these adaptors be found? Thanks! |
Edmundo Octaviani
New member
Username: mundial
Post Number: 3
Registered: 12-2008
| | Posted on Sunday, January 11, 2009 - 08:16 pm: |
|
Hi:
I had a similar issue with a Lucas M45G starter on a Perkins 4-107 engine. I had to fabricate a 1/4" thick spacer (adaptor) to make it work. I used aluminum material and it works fine and is easier to make than steel. |
|
|
