| Author |
Message |
    
Branko Kerpan
New member
Username: delladc10
Post Number: 1
Registered: 12-2007
| | Posted on Wednesday, February 13, 2008 - 03:04 pm: | 
|
I am servicing the twin Perkins T6.3544M diesels in my recently purchased cabin cruiser. I read the workshop manual backwards and forwards and can't find any mention of the Zinc anodes. I would expect that there is some in the multicooler. Can anyone confirm their existence and location? |
Bob
New member
Username: caperbob
Post Number: 1
Registered: 03-2008
| | Posted on Tuesday, March 04, 2008 - 12:50 pm: |
|
My mechanic, as well as the surveryor told me there aren't any on the T6.3544M. I also had searched. |
david kudley
New member
Username: kudley
Post Number: 2
Registered: 10-2006
| | Posted on Tuesday, March 04, 2008 - 07:58 pm: |
|
I agree with Bob........mine were born in 1984. unless there is one on the cold chamber of the heat exchanger center bolt of the round end cap where the raw water turns to go through the stack cooling tubes into the exhaust?
Dave |
Branko Kerpan
New member
Username: delladc10
Post Number: 2
Registered: 12-2007
| | Posted on Wednesday, March 05, 2008 - 01:53 pm: |
|
Thanks guys, you've been a big help. I'll check that center bolt just to be sure. |
Jan Erik Andersen
Visitor
| | Posted on Monday, March 24, 2008 - 03:34 pm: |
|
HEY in my Perkins T-6 3544 M is there two Zinc anodes in the saltwather coolingsystem.One in the caps off the oilcooler and the scond in a steelbend between the intercooler and the heat exchanger.The zinc anodes is probobly been eaten up so you must look for bolts that gives space for the anodes in the coolingsystem.I had to geet a new inntercooler to mine Perkins becours off no zinc anodes.Good luck From Jan Erik From NORWAY |
Branko Kerpan
New member
Username: delladc10
Post Number: 3
Registered: 12-2007
| | Posted on Tuesday, March 25, 2008 - 02:38 pm: |
|
Thank you Jan Erik, I will get my tools out. I certainly don't want to replace two intercoolers. Greetings from Croatia. |
