|
| Ford Lehman 80hp model Number |
| Author |
Message |
    
Graham Pattle
Visitor
| | Posted on Friday, January 19, 2007 - 10:42 pm: | 
|
I have a 1981 clipper boat with a 80hp Ford lehman N/A diesel, the serial number is either 703F6015AAA or 743F6090. I cannot find the engine model number and was wondering if anybody could put me onto the right track. Also Embossed into the header tank is the following " LEHMAN POWER LINDEN N.J.and the number 146206"
At the back of the engine, near the gearbox, a plate provides the following
"Original Engine Data Crank Mains 76.20
Block Mains 80.44
Crank Pins 66.60
Just below this plate are the words "Lehman MFG CO 548"
And on the exhaust manifold the words "Econo Power Patent 3015324 and the
number L146206.
As I have stated I am trying to identify the model or at the least if someone could suggest where i should Look Thanks
Regards Graham Pattle |
Capt William Myersl
Visitor
| | Posted on Saturday, January 20, 2007 - 10:20 am: |
|
For any questions or parts needed for a Lehman. American Diesel (1-804-435-3107)is the place to get the answers. |
BILL KELSO
Visitor
| | Posted on Wednesday, December 12, 2007 - 05:41 am: |
|
LOOKING FOR A LEHMAN MFG CO. MANIFOLD. #585 ECON-O-POWER. FITS A 300 CID 6 CYL FORD COMBO INTAKE / WATER COOLED EXHAUST. BILL AT meeco@bellsouth.net |
Michael Little
New member
Username: mlittle
Post Number: 3
Registered: 11-2007
| | Posted on Tuesday, August 05, 2008 - 10:50 pm: |
|
I have an Econo Power Manifold by Lehman Mfg co. Model #561, please advise if anyone can use this or what it fits. I also have many Barr and Osco marine manifolds for 4, 6 and 8 cyl engines, bell housings for Ford and Buick 401, and Buick odd fire engine manifolds, New and used. Thank You!
M.Little |
|
|
