| Author |
Message |
    
John B. Geddie
New member
Username: jgeddie
Post Number: 1
Registered: 08-2008
| | Posted on Sunday, August 17, 2008 - 12:25 pm: | 
|
What are the various manufacturers' part nos. for these double filters? What are the micron sizes?
The FL120 (model nos.2715-E or 6D380) specify a fuel filter element part number of "2701E-9150-B" but doesn't help much when going into a NAPA store, or buying WIX or FRAM or Racor filters. Help? What are the various part numbers for this filter element? And, what Micron size should it be?
Thank you. |
Fred Frog
Member
Username: lilypad
Post Number: 29
Registered: 01-2008
| | Posted on Sunday, August 17, 2008 - 12:49 pm: |
|
Wix #33166 is a 10 micron filter for the Lehman 120 "on engine" fuel filter. These have been used on my 120 Lehman for the past 5400 hours with no ill effects.
I understand you might be able to get other ratings but the 10 is what the factory sent out.
K |
Consumer on the coast
Visitor
| | Posted on Monday, September 08, 2008 - 11:32 pm: |
|
Are both filters the same? Wix #33166 |
Brian McDowell
New member
Username: consumer_on_the_coast
Post Number: 3
Registered: 09-2008
| | Posted on Monday, March 23, 2009 - 12:41 pm: |
|
My engine has the "two on engine filters" and the local engine people tell me that the second Ford Replacement is a 2 micron. I am having a hard time finding a part number for a 2 micron. Is the 10 micron adequate? |
Brian McDowell
Member
Username: consumer_on_the_coast
Post Number: 4
Registered: 09-2008
| | Posted on Thursday, March 26, 2009 - 09:03 pm: |
|
I was told the - Fram C1191A is correct.
- Wix 33166 also
They are both 10 micron however. The Fram Rep said they do not make that filter in a 2 micron version. Also said two micron was not required. |
