|
| 3GM30F Hard start, smoke and black sh... |
| Author |
Message |
    
Jonathan
New member
Username: capt_jonathan
Post Number: 1
Registered: 11-2009
| | Posted on Wednesday, November 18, 2009 - 02:46 pm: | 
|
Well after alot of reading and picking the way i wanted to go to find out the problem. Here it is. Got an injector adapter for compression test made at local machine shop. Tested the compression....# 1 = 360 psi, #2=355psi and #3=210psi. Bingo, found the problem. Now i will do a leak down test to confirm the rings or valves or head gasket.
So, any sugestion on what type of rings to replace the poss bad ones with. I heard about chrome are these type normal instal from factory.
Also, any tricks to get the head off the block
Thanks,
Jonathan |
|
|
