| Author |
Message |
    
pietro
New member
Username: pietro
Post Number: 2
Registered: 06-2009
| | Posted on Saturday, July 18, 2009 - 10:44 am: | 
|
Could you help me in explaining where to shot with a laser term to get the exact measure when testing the engines? I was told the max temp is 190: correct?
thank you! |
MARVIN PIERCE
Advanced Member
Username: marv
Post Number: 309
Registered: 09-2001
| | Posted on Saturday, July 18, 2009 - 12:28 pm: |
|
lower thermostste hsg, or some were on cyl head.why not install a manual temp gauge |
pietro
New member
Username: pietro
Post Number: 3
Registered: 06-2009
| | Posted on Friday, July 24, 2009 - 12:45 pm: |
|
you mean that I can shot directly exerywhere on heads? or tell me please where is the lower thermostate housings. |
pietro
Member
Username: pietro
Post Number: 4
Registered: 06-2009
| | Posted on Friday, July 24, 2009 - 12:50 pm: |
|
by the way, my two mechanical temp gauges have their sensors placed in the lower elbows below the water tank, on the right side if you look to the front side of the engine, where thera are the flywheels and the generators. Maybe the right place? |
MARVIN PIERCE
Advanced Member
Username: marv
Post Number: 311
Registered: 09-2001
| | Posted on Friday, July 24, 2009 - 02:31 pm: |
|
stat hsg on front of each cyl head,there are two hsg, top and bottom,stat fits in lower hsg. top hsg is hot water out. |
