|
| MD5A OVER HEATING UNDER LOAD |
| Author |
Message |
    
RICHARD HASKAYNE
Visitor
| | Posted on Wednesday, September 05, 2007 - 12:25 pm: | 
|
MD5A SUPERB STARTER/RUNNER OVER HEATS WHEN UNDER LOAD,CHECKED 1.WATER STOP COCK. 2.IMPELER 3.REMOVED THERMOSTAT 4.FLOW OF WATER AT EXHAST MANIFOLD. 5.FLOW OF WATER AT TRANSOM ALL ARE FINE.
I THINK THAT THE PROB IS IN THE WATER GALLERIES IN THE HEAD/BARREL AREA.
HAS ANY ONE ANY IDEAS........
MANY THANKS.
RICHARD. |
KURT KINGSTON
New member
Username: kurt_k
Post Number: 2
Registered: 09-2007
| | Posted on Monday, October 01, 2007 - 08:23 pm: |
|
Richard,
Just an amateur here and do not know how similiar the 5 and 6 are, but on my MD6-A raw water engine I found a number of the circulation passages inside the heat exchanger on the manifuld were plugged. Enough were open to allow circulation out of the exhaust.
I was able to restore all of the circulation passages in the heat exchanger by repeated overnight soakings of a Volvo Penta product called Neutra-Salt combined with probing and drilling with various items.
Good success,
Kurt K. |
|
|
