|
| VP AD41 Tacho's not working |
| Author |
Message |
    
Kevin Howe
New member
Username: kgh
Post Number: 1
Registered: 04-2007
| | Posted on Friday, April 20, 2007 - 11:18 am: | 
|
Can anyone help? Both tachos (dual station) are failing to read on the port engine of my boat. I took apart and cleaned the 'W' connection but it has made no difference. Could I swop a wire to the stb bank 'W' connection to see if that makes the port tachos work. Or what else is there thats obvious.
Any ideas appreciated. |
Dick V
Visitor
| | Posted on Saturday, April 21, 2007 - 09:53 am: |
|
Kevin, Should be able to switch 16 pin plugs from port and starboard to check operation. No charge= no tach. Check alternator charge rate. |
|
|
