| Author |
Message |
    
jarvis sameluk
New member
Username: jarvis
Post Number: 1
Registered: 03-2007
| | Posted on Thursday, March 29, 2007 - 10:50 am: | 
|
I need a heat exchanger for a TAMD70C Volvo Penta Diesel Jarvis |
jarvis sameluk
New member
Username: jarvis
Post Number: 2
Registered: 03-2007
| | Posted on Thursday, March 29, 2007 - 11:00 am: |
|
Wanted:heat echanger:Tamd70C Volvo Penta Diesel |
ian white
Visitor
| | Posted on Tuesday, April 03, 2007 - 12:14 am: |
|
good luck volvo are ringing the guts out of old volva marine owners like us.i am curently rebuilding a tamd 70c and heading into $9.000.so much for back up.get one made and gold plated it will be cheaper,on a positive note im on the hunt as well for a good manafold and will look for you,good hunting. |
jarvis sameluk
Member
Username: jarvis
Post Number: 5
Registered: 03-2007
| | Posted on Tuesday, April 03, 2007 - 02:42 pm: |
|
Thanks ian,if i locate some parts i will keep you in mind for a exaust manifold.You cant use the word cheap when you have a volvo |
Neilium
New member
Username: neilium
Post Number: 1
Registered: 06-2007
| | Posted on Friday, June 15, 2007 - 12:39 am: |
|
how to get frozen hinge pins out of an old 270D volvo leg? it's one with a worm drive to tilt the leg, off an MD 21A circa seventies. Have they got grub screws in the holes on the outside of the outer housing boss?
I need to replace them as they were cut by an over zealous and impatient mechanic.
Cheers Neil |
maec
New member
Username: flscubadiver72
Post Number: 1
Registered: 08-2007
| | Posted on Monday, August 27, 2007 - 05:19 pm: |
|
call me at 321-302-1255 i might be selling a complete running motor with a twin disc trans |
