| Author |
Message |
    
ricky maxey
New member
Username: rudenotto
Post Number: 1
Registered: 09-2009
| | Posted on Wednesday, September 23, 2009 - 07:45 pm: | 
|
having problems with the leg it will not go up have changed the relay still not working ,making a noice when go down with botton nothing when you do up. can you please help me |
BJs Marine
Member
Username: bjsmarine
Post Number: 31
Registered: 04-2007
| | Posted on Thursday, September 24, 2009 - 10:06 am: |
|
Check the wiring harness from the relays - to power supply and ground. There is a splice in the harness where 3 or 4 smaller wires for relays are connected to main feed wire. Have found corrosion problems there on many occasions.
Best luck
BJ |
Frank Barbara
Member
Username: fabarbara
Post Number: 7
Registered: 09-2008
| | Posted on Friday, September 25, 2009 - 10:57 am: |
|
I seem to be having a corrosion issue on my pursuit 3000 offshore starboard engine. The engine is a KAMD-44p. I checked all the ground wires inside hull and can't find a loose one. Is there a ground wire off the alternator or something else I can do to stop this?
Thanks
Also - I live in Florida and I was wondering if the operating temp is 180 degrees (no Load) and 200 degrees under load or cruise speed.
Thanks again
Frank |
Frank Barbara
Member
Username: fabarbara
Post Number: 8
Registered: 09-2008
| | Posted on Friday, September 25, 2009 - 10:58 am: |
|
Sorry was trying to post a NEW issue |
