|
| Author |
Message |
    
Terry Shugart
Member
Username: terryshugart
Post Number: 9
Registered: 03-2008
| | Posted on Tuesday, May 12, 2009 - 05:14 pm: | 
|
The fuel pump on my MD11C has two hollow bolts for the input and output lines which according to the parts schematic are identical. On mine one has a restriction that looks like a nozzle. Can someone tell me if the restriction is supposed to be on the input or output?? My guess would be output. The only line restriction I see on the parts schematic is on the line from the filter to the high pressure pump.
Thanks
Terry |
Richard Vosbury
Member
Username: vosman
Post Number: 47
Registered: 01-2009
| | Posted on Wednesday, May 13, 2009 - 08:22 am: |
|
The restricter goes in output of fuel filter to fuel injection pump. |
Terry Shugart
Member
Username: terryshugart
Post Number: 10
Registered: 03-2008
| | Posted on Wednesday, May 13, 2009 - 04:59 pm: |
|
Thanks for the response. Yes I saw the restriction on the output of the filter to the pump. Not where mine was though. If I was to but a nozzle (that's what the parts list calls it) on a pump it would be on the output. So that's where I'll put it.
Thanks again for the response.
Terry |
|
|
