    
Bob Theriot
Member
Username: bobt
Post Number: 4
Registered: 01-2008
| | Posted on Tuesday, February 05, 2008 - 06:24 pm: | 
|
Am replacing the engines and trying to connect TAMD41As to my old TAMD40As instrument pannels. Problem is, the TAMD41As used a plug in cannon plug,(missing from the units)only the wire ends are in box. The 40s used a different connection, it also had a glow plug and I understand the tach/RPM picks up from the alternator and I'll need to change the indicators. I can hard-wire the connections into the old 40 type plug, but there are considerable differences...color codes, two relays, etc. Has anyone knowledge of easy solution???
Thanks
Bob Theriot |
