| Author |
Message |
    
IAN MASON
Member
Username: riviera_27
Post Number: 5
Registered: 11-2007
| | Posted on Wednesday, December 26, 2007 - 07:46 pm: | 
|
The trim guage on my VP AD41DP ticks continuously whenever the engine is running. Also when opperating the switch in the trim range the leg moves very slowly however if I press the switch next to it (at the same time) the leg moves at the normal speed (this action overrides the safety system and is not correct opperation). Everything else with the trim guage reading is working well. Any suggestions would be appreciated |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 2988
Registered: 09-2006
| | Posted on Thursday, December 27, 2007 - 08:20 pm: |
|
clean the conections |
IAN MASON
Member
Username: riviera_27
Post Number: 6
Registered: 11-2007
| | Posted on Friday, January 04, 2008 - 05:38 pm: |
|
Thanks for the reply. Do you mean the connections at the guage or at the pump? |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 3027
Registered: 09-2006
| | Posted on Friday, January 04, 2008 - 11:29 pm: |
|
at the gauge and fuse block |
