|
| Chris-Craft Sportsman 16 Gull Wing |
| Author |
Message |
   
Bruce Reynolds
Member Username: the_tassie_devil
Post Number: 33 Registered: 02-2009
| | Posted on Wednesday, March 25, 2009 - 04:55 am: |
|
G'day all, I realise that this site is designed to cater for the mechanical side of things, and my boat is partly mechanical, but I was wondering if anyone out there might have the Specifications, measurements and schematics of a 1972 or 1973 Chris-Craft Sportsman 16 Gull Wing. I have the vessel here in Australia, and stripped it out before it left USA, as the wooden framework and Boyancy Foamwork inside it was totally rotten, and filled with Carpenter Ants. I am ready to reinstall the seats but the pictures I took really don't give me what I want as a reference, and I cannot find anywhere on the Internet anything that I would like to see. There are pictures and the like, but I would like a bit more than that. Any assistance appreciated. Thanks, Bruce. PS. Anyone have a spare Owners Manual that might have come with them when they were new? |
   
Lukey
Member Username: partgypsy
Post Number: 4 Registered: 11-2007
| | Posted on Wednesday, March 25, 2009 - 08:01 am: |
|
G'day to you Here is a link to the archives of the Chris Craft company at the Mariners Museum in Hampton Road, VA. http://www.mariner.org/library/chriscraft/index.php This is a gold mine, happy digging! You could also try the Antique and Classic Boat Society (ACBS) http://www.acbs.org/ or The Chris Craft Club http://www.chris-craft.org/index.php |
   
Bruce Reynolds
Member Username: the_tassie_devil
Post Number: 34 Registered: 02-2009
| | Posted on Monday, March 30, 2009 - 12:46 am: |
|
Thanks Lukey, I have tried joining up with the Chris Craft Club, but for some unknown reason, I can get everything done, but when it comes to paying via Visa Card, it gets rejected. Will perservere though. Bruce. |
   
Mark Weller
Member Username: mhweller
Post Number: 24 Registered: 02-2006

| | Posted on Thursday, April 02, 2009 - 07:44 am: |
|
Take a look here http://www.ultimate.com/omc-boats/gallery/chris-craft.html there are some pics of the gull wing in 16 and 19 foot models |
   
Bruce Reynolds
Member Username: the_tassie_devil
Post Number: 35 Registered: 02-2009
| | Posted on Friday, May 01, 2009 - 10:10 pm: |
|
Further, does anyone know what these crafts were rated at by the Factory for Occupancy Limits? Thanks, Bruce. |
   
Bruce Reynolds
Member Username: the_tassie_devil
Post Number: 37 Registered: 02-2009
| | Posted on Thursday, May 21, 2009 - 08:11 am: |
|
I made a bit of a mistake when writing up the heading. I should have written Seasport 16. Sorry for the inconvenience. Bruce. |
|
|