| Author |
Message |
   
Mark Ferguson
Member Username: shogun
Post Number: 21 Registered: 09-2007
| | Posted on Sunday, November 08, 2009 - 10:00 pm: |
|
I have twin motors that have been rebuilt by Jasper and on the reverse motor have had two bad rear main seals and have had to pull the motors , And I will be pulling again this week , The question!! is there a different seal for those two motors. |
   
Fastjeff
Senior Member Username: fastjeff
Post Number: 7101 Registered: 09-2003

| | Posted on Monday, November 09, 2009 - 06:04 am: |
|
On the 318/ 360s there is a different rear main seal. Jasper motors have mixed reviews; some swear by them, some at them. Jeff |
   
Dan Finnelly
Member Username: tolly_family
Post Number: 89 Registered: 07-2006
| | Posted on Tuesday, November 10, 2009 - 07:56 pm: |
|
Sounds like they put a standard rotation crank in and it is pumping oil out instead of in. Yes the cranks are different! Dan |
   
Mark Ferguson
Member Username: shogun
Post Number: 29 Registered: 09-2007
| | Posted on Monday, November 23, 2009 - 10:03 pm: |
|
I will be pulling the motor over the holidays , how can I tell if the crank is the wrong one???? |
   
Fastjeff
Senior Member Username: fastjeff
Post Number: 7184 Registered: 09-2003

| | Posted on Tuesday, November 24, 2009 - 07:34 am: |
|
Can't help you there. All I know is that they use different seals. Jeff |
   
Dave Spoula
Advanced Member Username: daves69
Post Number: 267 Registered: 11-2005

| | Posted on Tuesday, November 24, 2009 - 12:26 pm: |
|
Try here Mark, they have a M440 manual available in PDF for download .......... http://www.correctcraftfan.com/reference/manuals.asp |
   
Robert Bowman
New member Username: skiperbob
Post Number: 1 Registered: 01-2010
| | Posted on Sunday, January 17, 2010 - 07:42 pm: |
|
Greetings! I am looking for the PARTS manual for the Chrysler M440 (1964). Can anyone give me a lead? Thanks. |
   
Dave Spoula
Advanced Member Username: daves69
Post Number: 280 Registered: 11-2005

| | Posted on Sunday, January 17, 2010 - 07:55 pm: |
|
Try here, about middle of the page ...... http://www.marineengine.com/manuals/chrysler/index.html |