| Author |
Message |
    
jimw
Member
Username: jimw
Post Number: 4
Registered: 07-2009
| | Posted on Monday, November 09, 2009 - 12:34 pm: | 
|
Question about the bearing housing assembly, 2004 Crusader 6.0L. Is there a seal kit for the shaft that runs throuh the Bearing Housing Assembly. Mine seems to be leaking around the shaft. I don't see one in the part manual but I would think there would have to be a seal around that shaft. Otherwise I will have to buy a whole new Shaft Assembly.
It looks like I will have to use a press to push the shaft out to replace the seal. |
Don Keye
Advanced Member
Username: willow
Post Number: 102
Registered: 11-2008
| | Posted on Monday, November 09, 2009 - 03:27 pm: |
|
Water Pump ???
About six threads below you will find good info and links to parts and assembly diagrams.. Here is the thread..........
http://www.marineengine.com/discus/messages/12489/296150.shtml |
jimw
Member
Username: jimw
Post Number: 5
Registered: 07-2009
| | Posted on Monday, November 09, 2009 - 05:35 pm: |
|
Sorry about that, I am talking about the raw water pump. |
Bob Meck
Member
Username: bob_on_this
Post Number: 63
Registered: 01-2009
| | Posted on Monday, November 09, 2009 - 06:16 pm: |
|
Maybe your looking at your circulation pump?
The link Don listed IS the raw water pump. |
makomark
Senior Member
Username: makomark
Post Number: 1852
Registered: 09-2008
| | Posted on Monday, November 09, 2009 - 08:23 pm: |
|
The link referenced is for the older sherwood pumps. The 6.0 has a different beast. Crusader's parts listing doesn't show a seal kit for the pump.
I'd suggest taking the pump off and inspecting it for the OEM's number. It is possible that it was "custom made" but not likely. Sommetimes, it just takes an afternoon going thru the catalogs to find out who made it. Afterwards, the seal kit is only money. |
jimw
Member
Username: jimw
Post Number: 6
Registered: 07-2009
| | Posted on Tuesday, November 10, 2009 - 07:07 am: |
|
Thanks for the help. I don't know if it is just me or if other folks have trouble getting in touch with the parts/techincal guys at Crusader. I have made several calls to them with questions on various issues including this one and had to leave voice mails. They have never returned my calls. |
