| Author |
Message |
    
gary generous
Member
Username: doubleg
Post Number: 12
Registered: 01-2008
| | Posted on Thursday, November 05, 2009 - 09:17 am: | 
|
the E-35 sherwood water pump i have on my 350 crusader is leaking from the shaft. my question is, is it possible to completley rebuild the pump to include shaft,seals,and all internal parts or does the whole thing need replacing? if it is rebuildable any suggestions on where to find COMPLETE rebuild kits? thanks for any help |
Thomas Kelly
Member
Username: major_tom
Post Number: 75
Registered: 01-2008
| | Posted on Thursday, November 05, 2009 - 09:38 am: |
|
Try Depco Pump, Clearwater, FL. http://www.depcopump.com/ |
diver dave
Advanced Member
Username: diver_dave
Post Number: 496
Registered: 08-2008
| | Posted on Thursday, November 05, 2009 - 09:55 am: |
|
The minor rebuild kit comes with the new seal, impellor, and gasket. The major kit adds the cam, cover bushing, and front ball bearing. The major rebuild will require a puller for the hub and a press. Just a seal swap will not involve special tools, except for retaining ring pliers. I just did a major rebuild on both mine in the last month. The major kit sells for ~ $115, if you shop around you can do slightly better. The new pump is from $250 to 300. Over the years, i've been neglecting the condition of both the cover and the cam, I've got it pretty much figured out now. |
makomark
Senior Member
Username: makomark
Post Number: 1835
Registered: 09-2008
| | Posted on Thursday, November 05, 2009 - 11:28 am: |
|
http://www.sherwoodpumps.com/FileAttachments/Marine-Distribution/en-us/MPG_3050_ R%20Series_TECH.pdf
This will give you an idea of what's needed.
As suggested, shop around. |
Joel Daugherty
Member
Username: joeld98
Post Number: 6
Registered: 08-2009
| | Posted on Thursday, November 05, 2009 - 09:04 pm: |
|
Here is the major kit. I did it without a press, but wish I'd had one. The puller is a must have though. A decent shop vise helps also.
 |
Fastjeff
Senior Member
Username: fastjeff
Post Number: 7087
Registered: 09-2003
| | Posted on Friday, November 06, 2009 - 04:31 am: |
|
If you don't mind, how much did you pay for that kit, Joel, and where did you buy it?
Thanks,
Jeff |
diver dave
Advanced Member
Username: diver_dave
Post Number: 499
Registered: 08-2008
| | Posted on Friday, November 06, 2009 - 08:58 am: |
|
$100 @ jms |
Joel Daugherty
Member
Username: joeld98
Post Number: 8
Registered: 08-2009
| | Posted on Friday, November 06, 2009 - 12:33 pm: |
|
106 @ Marine Parts Source 3/2009 |
Fastjeff
Senior Member
Username: fastjeff
Post Number: 7091
Registered: 09-2003
| | Posted on Friday, November 06, 2009 - 12:36 pm: |
|
"jms"?
Jeff |
makomark
Senior Member
Username: makomark
Post Number: 1847
Registered: 09-2008
| | Posted on Friday, November 06, 2009 - 02:48 pm: |
|
http://www.jmsonline.net/kit-major-repair-for-a-e35.htm |
Fastjeff
Senior Member
Username: fastjeff
Post Number: 7093
Registered: 09-2003
| | Posted on Saturday, November 07, 2009 - 12:03 pm: |
|
Thanks!
Jeff |
