|
| 350 volvo mated to 290 volvo IO |
| Author |
Message |
    
jim piersol
Member
Username: sammi
Post Number: 77
Registered: 05-2007
| | Posted on Wednesday, October 14, 2009 - 10:17 am: | 
|
I need a new engine and talked to a guy who has a volvo 350 that came out of a bayliner. It was attached to a volvo 290 IO. I need an inboard. Can I just get a chevy bell housing to fit my borg warner and am good to go or are there flywheel issues etc. It is right hand rotation which is what I need. |
Ricardo E.
Advanced Member
Username: ricardomarine_vp
Post Number: 681
Registered: 03-2009
| | Posted on Wednesday, October 14, 2009 - 12:39 pm: |
|
All Volvo I/O engines are LH (Standard) rotation.... there is no RH (counter) rotation for the Volvo I/O using the cone clutch.
See this: http://www.ebasicpower.com/faq/rotate.htm
If you need a RH engine, then some work would need to be done... may be better to build one or check in with MichiganMotorz.com
Be sure to click on the menu under "categories".
http://www.michiganmotorz.com/
In answer to the "flywheel cover"... Yes, any SBC flywheel cover, w/ the B/W bolt pattern, should work so long as it accommodates the I/B type starter motor mounting.
, |
|
|
