| Author |
Message |
    
S.W.Little
New member
Username: luckyleo71
Post Number: 1
Registered: 09-2009
| | Posted on Tuesday, September 22, 2009 - 09:23 pm: | 
|
86' Glastron with 351 W small block & volvo penta AQ 250 Runs great and will shift into forward gear but not reverse. Forward controls look to be in good working order. Cable slides forward into gear and back to neutral but not enough for reverse. Out drive is locked in the down position. Any ideas? |
El Pescador
Senior Member
Username: el_pescador
Post Number: 4941
Registered: 02-2006
| | Posted on Tuesday, September 22, 2009 - 11:47 pm: |
|
I suspect screws 33 may have become loose and the tab 32 is not holding the shift cable sleeve in place.
http://www.volvopentastore.com/Intermediate_Housing_Aq_Drive_Unit_280/dm/cart_id .821787780--session_id.996056427--store_id.366--view_id.316986
If not, it is also possible that the cable sleeve has become loose in the control by the helm. |
Ricardo E.
Advanced Member
Username: ricardomarine_vp
Post Number: 615
Registered: 03-2009
| | Posted on Wednesday, September 23, 2009 - 11:21 am: |
|
This makes little difference to what Eduardo is suggesting...... it will be the same scenario.
But an '86 Glastron with the 5.8L may have been an AQ 240..... I think.
If you are referring to your drive, I don't believe this will be a 250 drive!
El, correct me here if wrong.
|
El Pescador
Senior Member
Username: el_pescador
Post Number: 4945
Registered: 02-2006
| | Posted on Wednesday, September 23, 2009 - 12:02 pm: |
|
You are right, Ricardo, the AQ240 was the only original AQ package from the 70s with a 351 Windsor. However, some people have made their own mods with the Borg Wagner adapter, though. Also, the AQ240 came packaged with the 280 drive.
In any case, the link I posted was for the drive installed on the AQ190/240, both of them with Ford engines.... |
Ricardo E.
Advanced Member
Username: ricardomarine_vp
Post Number: 616
Registered: 03-2009
| | Posted on Wednesday, September 23, 2009 - 12:47 pm: |
|
Quote: "You are right, Ricardo" (God I love that part)...... .... "the AQ240 was the only original AQ package from the 70s with a 351 Windsor. However, some people have made their own mods with the Borg Wagner adapter, though."
Yep..... Been there/done that to my son's 2450 SND F/B boat and to a few other boats! Duo Prop drives to boot! What a difference! |
S.W.Little
New member
Username: luckyleo71
Post Number: 2
Registered: 09-2009
| | Posted on Wednesday, September 23, 2009 - 10:10 pm: |
|
Thank you very much. Will give it a try. |
