| Author |
Message |
    
Todd Goldberg
New member
Username: trgoldb
Post Number: 1
Registered: 07-2009
| | Posted on Saturday, July 18, 2009 - 07:57 pm: | 
|
I took off my Volvo DuoProp to lube the shafts. But when I went to put them back on, the rear spline seems to have pulled up. It is now covering the threads I need to put the nut on. This is the larger, outer spline. Does anybody know how to push the outer spline shaft back down? |
Ricardo E.
Advanced Member
Username: ricardomarine_vp
Post Number: 417
Registered: 03-2009
| | Posted on Saturday, July 18, 2009 - 09:58 pm: |
|
It would help ME if we could talk in terms of fwd and aft.... (as in fwd propeller/fwd shaft splines.... aft propeller/aft shaft splines, etc.)?
I'm not sure what "seems to have pulled up" nor what "push the outer spline shaft back down" means!
Sorry, but I need to think in terms of when installed in a typical DP drive scenario. |
Todd Goldberg
New member
Username: trgoldb
Post Number: 2
Registered: 07-2009
| | Posted on Saturday, July 18, 2009 - 10:57 pm: |
|
Sorry, it is the fwd prop (larger prop, goes on 1st, larger, outer shaft). The spline shaft has moved towards the open end of the shaft covering the threads I need to put the holding nut on. |
Todd Goldberg
New member
Username: trgoldb
Post Number: 3
Registered: 07-2009
| | Posted on Sunday, July 19, 2009 - 12:09 am: |
|
Disregard! Problem resolved!! We're goin' 2 the river!!! |
Ricardo E.
Advanced Member
Username: ricardomarine_vp
Post Number: 418
Registered: 03-2009
| | Posted on Sunday, July 19, 2009 - 09:10 am: |
|
You take us out for a nice dinner, followed by some dancing and then a kiss at the front door......... and what.... no phone call?
Come on..... what was the fix?  |
