| Author |
Message |
    
chris wogan
New member
Username: wogie
Post Number: 1
Registered: 07-2009
| | Posted on Wednesday, July 15, 2009 - 01:45 pm: | 
|
no.4 port is corroded,I realize that this is a common problem.My question is can the flange be welded or sleaved or do I need a new head |
El Pescador
Senior Member
Username: el_pescador
Post Number: 4664
Registered: 02-2006
| | Posted on Wednesday, July 15, 2009 - 02:19 pm: |
|
Yes, yo can get the head TIG-welded or you can get it milled and install a steel insert. |
chris wogan
New member
Username: wogie
Post Number: 2
Registered: 07-2009
| | Posted on Wednesday, July 15, 2009 - 03:12 pm: |
|
many thanks for your prompt reply El,would you happen to know if there is an insert available or is it a custom job? thanks wogie |
Rick M
Member
Username: volvo250
Post Number: 5
Registered: 05-2009
| | Posted on Wednesday, July 15, 2009 - 04:18 pm: |
|
Sorry I posted in the wrong place. |
