|
| Author |
Message |
    
Robert Walker
New member
Username: cabbageman
Post Number: 1
Registered: 11-2009
| | Posted on Saturday, November 07, 2009 - 04:16 am: | 
|
I have a 2003 4.3 mpi with the alpha gen II leg and there seems to be a fair bit of end float in the prop shaft about 2 to 3mm, is that normal? |
Kghost
Senior Member
Username: kghost
Post Number: 1067
Registered: 07-2008
| | Posted on Saturday, November 07, 2009 - 07:37 am: |
|
yes |
Kghost
Senior Member
Username: kghost
Post Number: 1068
Registered: 07-2008
| | Posted on Saturday, November 07, 2009 - 07:38 am: |
|
it is the shaft that is moving in and out of the lower unit. |
Bondo
Senior Member
Username: bondo
Post Number: 2086
Registered: 12-2006
| | Posted on Saturday, November 07, 2009 - 11:35 am: |
|
Ayuh,... In/ Out by about 1/8" is Normal...
Any side to side is Not... |
|
|
