|
| Author |
Message |
    
Cpn Crispy
Member
Username: captain_crispy
Post Number: 16
Registered: 02-2009
| | Posted on Wednesday, October 28, 2009 - 10:14 pm: | 
|
A buddy recently bought a sweet Wellcraft V20 with an MR-1 outdrive. The stainless steel prop is seized to the propshaft. Never had a stuck prop myself [no such thing as too much grease], so I am unsure how to get it off the shaft without damaging the hub. Anyone have any ideas ? |
Bt Doctur
Senior Member
Username: bt_doctur
Post Number: 1198
Registered: 06-2006
| | Posted on Wednesday, October 28, 2009 - 10:36 pm: |
|
Use a prop puller or
Heat the outer part untill it pulls off the hub and cut the inner hub part off the shaft. |
gl115
New member
Username: gl115
Post Number: 3
Registered: 11-2009
| | Posted on Monday, November 02, 2009 - 06:32 am: |
|
spray it with some PB Blaster, then wait an hour and spray it again, then use a prop puller, if that don't work like BT Doc said, break out the heat. |
|
|
