|
| 454 Mag Impeller replacement? |
| Author |
Message |
    
John P
Member
Username: jpflhr
Post Number: 43
Registered: 08-2006
| | Posted on Wednesday, October 14, 2009 - 04:45 pm: | 
|
I have a 94 454 Mag with a Bravo 1 - I am looking at replacing the impeller on the seawater pump. -Can this be done without removing the sea water pump from the engine? It has the fuel pump on top of it and was not wanting to mess with that and Vbelts---
The pump was replaced in 2005 but feel need to change impeller as being now 4+ yrs old.
Is there any instructions for this?
The rebuild kit I was told to buy is 46-807151A14 comes with 1 piece housing
47-59362T6 Impeller kit comes with out housing
John |
Rick Sweeten
Senior Member
Username: linesix
Post Number: 1604
Registered: 11-2002
| | Posted on Thursday, October 22, 2009 - 09:34 pm: |
|
Yes, it is possible although depending on access provided by the boat manufacturer, sometimes it's easier to pull the pump. |
John P
Member
Username: jpflhr
Post Number: 44
Registered: 08-2006
| | Posted on Friday, October 23, 2009 - 01:20 pm: |
|
Thanks looks like I change and acess is good-- Going to give it a try and if no good will remove the pump
Thanks
John |
Bondo
Senior Member
Username: bondo
Post Number: 2075
Registered: 12-2006
| | Posted on Saturday, October 24, 2009 - 07:48 am: |
|
Ayuh,... Do yourself a Favor,...
Pull the pump,+ rebuild it on the Bench... |
|
|
