| Author |
Message |
    
Jeff Waters
Member
Username: scarab_excell
Post Number: 53
Registered: 10-2007
| | Posted on Sunday, May 11, 2008 - 10:06 pm: | 
|
the tiny oring between the lower half and upper half in my water pump kit is a round o ring and it fits in the oil hole. what is a quad seal I keep hearing about? can I use the one that came in the water pump kit? |
Rick Root
Member
Username: rickroot
Post Number: 52
Registered: 05-2008
| | Posted on Sunday, May 11, 2008 - 10:11 pm: |
|
The one that came in my water pump kit IS round, but it's flat, morel ike a rubber washer. |
Bt Doctur
Advanced Member
Username: bt_doctur
Post Number: 298
Registered: 06-2006
| | Posted on Sunday, May 11, 2008 - 10:43 pm: |
|
about 3/8ths dia. round but flat,"Quad Seal" and goes in the recess of the lower unit to seal the oil passage. |
Jeff Waters
Member
Username: scarab_excell
Post Number: 54
Registered: 10-2007
| | Posted on Monday, May 12, 2008 - 05:03 pm: |
|
Holy chit, my wonderful 14 year old son lost all 4 of my washers that hold my foot on. Now I dont know what size they are. The ones he lost are the 2 that go on the hard to take off nuts on the side and the 2 that has the studs you get to straight up from the bottom. I still have the one on the rear of the gear housing but it is different and will not fit on the ones that go straight up from the bottom.
Any one know what size these are and where can I get them? |
Bondo
Senior Member
Username: bondo
Post Number: 1012
Registered: 12-2006
| | Posted on Monday, May 12, 2008 - 06:52 pm: |
|
"and where can I get them?"
Ayuh,.... Unfortunately,...... From Mercruiser....
Nothing "Off the Shelf" will be even Close..... |
Danny
Member
Username: mnydvr
Post Number: 5
Registered: 04-2008
| | Posted on Monday, May 12, 2008 - 07:32 pm: |
|
sierra sells the kits cheaper than merc,or go to a mechanic and he may have one in his tool box,ya' never know!! |
Jeff Waters
Member
Username: scarab_excell
Post Number: 55
Registered: 10-2007
| | Posted on Monday, May 12, 2008 - 08:55 pm: |
|
I will try, I need the 2 side ones and the 2 bottom ones!!!!!!!!! |
Guy Gaspar
Senior Member
Username: guyjg
Post Number: 2016
Registered: 08-2006
| | Posted on Monday, May 12, 2008 - 11:55 pm: |
|
Get yourself a magnetic parts tray so junior (yeah) doesn't do it again. |
Jeff Waters
Member
Username: scarab_excell
Post Number: 56
Registered: 10-2007
| | Posted on Tuesday, May 13, 2008 - 04:49 am: |
|
I GOT some of those trays, but stainless steel is not magnetic. |
