| Author |
Message |
    
Ned Latimer
New member
Username: nedl
Post Number: 1
Registered: 05-2008
| | Posted on Monday, May 05, 2008 - 01:21 pm: | 
|
I have a 1984 Checkmate boat with 260 horse power I/O Mercruiser 5.7 liter engine. On the power trim and tilt, the wires are frayed and the insulation is falling apart on the gimble at the outboard unit. The reason I need this repaired is that the wires rub together during operation and blow the fuses at the power tilt pump. My question is, do I have to remove the outboard unit to replace these wires or is there another fix you would recommend? |
Bondo
Advanced Member
Username: bondo
Post Number: 988
Registered: 12-2006
| | Posted on Monday, May 05, 2008 - 09:17 pm: |
|
Ayuh,....
Personally,....
I disconnected it on the Inside of the transom, at the bullet connectors.....
I can Feel where the drive is,....
I don't need a Gauge, Or the Trim Limit....
Otherwise,....
Ayuh,.... The Whole outside transom has to come apart... |
|
