| Author |
Message |
    
Reuben Schembri
New member
Username: reuben485
Post Number: 1
Registered: 10-2009
| | Posted on Friday, October 23, 2009 - 02:11 pm: | 
|
Hi i Have a tohatsu 9,9 2 stroke manual start and id like to light a bulb with and maybey charge a battry. Wath do I need to do this. from the motor ther are 3 wires coming out, one black 1 white and 1yellow. Do i need a rectifier to charge a battry?
Thanks |
Tohatsu Guru
Senior Member
Username: tohatsu_guru
Post Number: 1022
Registered: 06-2007
| | Posted on Friday, October 23, 2009 - 03:41 pm: |
|
Yes, you would need a rectifier to charge the battery. The correct one would be determined by the model number of the engine. |
Reuben Schembri
New member
Username: reuben485
Post Number: 2
Registered: 10-2009
| | Posted on Saturday, October 24, 2009 - 12:44 am: |
|
Ok thanks and if I want to light a bulb only which wires should i use from the yellow,white or black? |
Tohatsu Guru
Senior Member
Username: tohatsu_guru
Post Number: 1026
Registered: 06-2007
| | Posted on Tuesday, October 27, 2009 - 11:31 am: |
|
There should only be a yellow and a white lead coming out from underneath the flywheel. |
Reuben Schembri
New member
Username: reuben485
Post Number: 3
Registered: 10-2009
| | Posted on Thursday, October 29, 2009 - 02:55 pm: |
|
There are 3 leads coming out from underneath the flywheell. white and yellow and black. The model number of my tohatsu is M9.9D2 |
Tohatsu Guru
Senior Member
Username: tohatsu_guru
Post Number: 1031
Registered: 06-2007
| | Posted on Thursday, October 29, 2009 - 03:40 pm: |
|
That model does not have a pulsar coil so its wired a little differently. You would still only use the white and yellow leads. The black lead is used for connection to an engine wring harness when set up for remote control operation. |
Reuben Schembri
Member
Username: reuben485
Post Number: 4
Registered: 10-2009
| | Posted on Friday, October 30, 2009 - 01:43 pm: |
|
Ok thanks very much for the usefull information. |
