| Author |
Message |
    
Gary Schneider
New member
Username: garyak
Post Number: 1
Registered: 09-2009
| | Posted on Thursday, September 24, 2009 - 03:30 am: | 
|
I want to repower with 50 TLDI. Already have tach, tilt/trim, hour meter installed. Will I need all new Tohatsu guages or will current ones work? Thanks for any assistance. |
Tohatsu Guru
Advanced Member
Username: tohatsu_guru
Post Number: 966
Registered: 06-2007
| | Posted on Thursday, September 24, 2009 - 09:17 am: |
|
The engine comes with a tachometer and trim gauge as standard equipment. Hour meters are universal so you can reuse that one. |
Gary Schneider
New member
Username: garyak
Post Number: 2
Registered: 09-2009
| | Posted on Thursday, September 24, 2009 - 11:28 pm: |
|
Thanks, TG. I think I'll replace the hour meter. I did a search and see their are many different units available and they seem to vary widely in voltage parameters. What kind of voltage spread should I be looking at for the TLDI 50? Would you suggest mechanical or digital? Tohatsu wants $150 for theirs...most of what I have found is in the $20-50 range. TIA for your advice! |
Tohatsu Guru
Advanced Member
Username: tohatsu_guru
Post Number: 968
Registered: 06-2007
| | Posted on Friday, September 25, 2009 - 08:03 am: |
|
As long as it will work on a 12 volt engine the hour meter will work. I like digital, but it makes no difference to the engine. |
