DT-140 seems to be going out of gear.

Author Message   Larry K. O'shields New member Username: carryinghiscross Post Number: 3 Registered: 05-2009 Posted on Wednesday, November 18, 2009 - 12:06 am:    My motor is running fine, but when I speed up to about 15 MPH it sounds as if the engine is coming out of the water or dropping out of forward. When I slow down it runs OK. Any ideas? Thanks!   Rollie Rose Advanced Member Username: profisher Post Number: 558 Registered: 12-2008 Posted on Wednesday, November 18, 2009 - 12:23 am:    spun prop   Larry K. O'shields Member Username: carryinghiscross Post Number: 4 Registered: 05-2009 Posted on Wednesday, November 18, 2009 - 12:03 pm:    Thanks Rollie, My computer is acting weard. I will need a new prop and computer it seems. I'll have to write Santa. Thanks again   Larry K. O'shields Member Username: carryinghiscross Post Number: 5 Registered: 05-2009 Posted on Wednesday, November 18, 2009 - 03:51 pm:    This might be a dumb question, but can a "spun prop" be repaired? Thanks!   Marion Moore Member Username: marion_moore Post Number: 63 Registered: 02-2009 Posted on Wednesday, November 18, 2009 - 05:01 pm:    Spun props can be repaired by a prop shop. You just have to find one. I have a '97 to '00 DT140 EFI computer if you find you need one.   Larry K. O'shields Member Username: carryinghiscross Post Number: 6 Registered: 05-2009 Posted on Wednesday, November 18, 2009 - 11:11 pm:    Thank you Marion, You all are a great help!!!!!   JUST-IN-TIME Senior Member Username: justintime Post Number: 7111 Registered: 09-2006 Posted on Friday, November 20, 2009 - 04:24 am:    yep spun   Marion Moore Member Username: marion_moore Post Number: 64 Registered: 02-2009 Posted on Friday, November 20, 2009 - 03:12 pm:    Oh, I have three 3 blade SS 13 1/4 x 18 props that came off of DT140's. Let me know if you are interested.   Larry K. O'shields Member Username: carryinghiscross Post Number: 7 Registered: 05-2009 Posted on Friday, November 20, 2009 - 05:38 pm:    I wish I had known Marion, I ordered one yesterday. I live in Union SC. I believe I have heard you say something about the Conway area. Is that your neighborhood? thanks for the information, I might talk to you about a spare if I can afford one.   Marion Moore Member Username: marion_moore Post Number: 65 Registered: 02-2009 Posted on Friday, November 20, 2009 - 08:08 pm:    Union, yeah. You're not too far from Great Falls, Wateree, and Murray. Both of my wifes sisters live in Rock Hill. We spend a good bit of time going up there. I'm here in Conway. Not a bad location. A little less than an hour from Georgetown. I'm so dumb. I didn't even think to say I have three props that I'm not using. I have many other parts as well. I blew my DT115 EFI last year.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: Only registered users may post messages here. Registration is FREE and easy, click on the REGISTER link at the top of the page. Thanks. Password: Options: Automatically activate URLs in message Action:

Administration Log Out   Previous Page Next Page