| Author |
Message |
    
Michael thaler
New member
Username: mikeys8876
Post Number: 1
Registered: 11-2009
| | Posted on Sunday, November 08, 2009 - 11:32 pm: | 
|
I have a 1992 DT15C with pull start and till steer. I just bought it from a friend and he said he put a new CDI unit on it. It was running fine when I was driving it and it suddenly turned off, it was like I was driving it and I hit the kill switch. First thing I checked was the spark and no spark at all. I dont know what to do any help would be nice. Thanks a lot. |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 7041
Registered: 09-2006
| | Posted on Tuesday, November 10, 2009 - 04:54 am: |
|
check stop switch and all wires |
Michael thaler
New member
Username: mikeys8876
Post Number: 2
Registered: 11-2009
| | Posted on Saturday, November 14, 2009 - 04:59 pm: |
|
I checked the kill switch and it's ok I also checked if any of the wires came loose and there All good I don't know what else to check |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 7087
Registered: 09-2006
| | Posted on Sunday, November 15, 2009 - 01:32 am: |
|
you now need a meter and DVA to test things |
Michael thaler
New member
Username: mikeys8876
Post Number: 3
Registered: 11-2009
| | Posted on Sunday, November 15, 2009 - 11:42 am: |
|
I have a multi meter I just don't know what to check there are so many wires and I don't have a scematic. |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 7101
Registered: 09-2006
| | Posted on Friday, November 20, 2009 - 03:12 am: |
|
you also need a DVA |
