|
| DF140 cooling system pilot hole not f... |
| Author |
Message |
    
Paddy Smith
New member
Username: jaguar
Post Number: 1
Registered: 09-2009
| | Posted on Friday, September 04, 2009 - 05:27 am: | 
|
Engine has been standing for 12 months. Water flows thru engine and out thru prop hub but not a drop thru the pilot hole. I have managed to work a piece of heavy mono up thru the pilot hole for +/- 2 feet and cleared quite a bit of salt crystals out, but still no water comes thru. Can anyone with access to a 90/115/140 shop manual tell me if there is some other component between the block and pilot hole that could be causing this? Also, any ideas on what to try next. Many thanx |
Marion Moore
Member
Username: marion_moore
Post Number: 59
Registered: 02-2009
| | Posted on Friday, September 11, 2009 - 08:34 pm: |
|
You can pull up the parts breakdown on Browns Point Marine. I'm not sure of the year so you may have to look up another year model. http://store.brownspoint.com/df140/1400207.asp |
|
|
