| Author |
Message |
    
Kenny McFarland
New member
Username: coatiehog
Post Number: 1
Registered: 03-2008
| | Posted on Monday, March 31, 2008 - 05:46 pm: | 
|
Hi all,
I have fell victim to the poor carb design on the honda 4strokes. Ok maybe I had a hand in it. My motor is an 03 75 hp carb model. It is giving me all the symtpoms of a fouled up carb. I have removed all four and cleaned them the best I can. Question is how expensive is the rebuild kit and how do I know if all four need rebuilt and does any one have the service manuals in E-format? Any direction would be helpful.
Thanks
Kenny |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 3611
Registered: 09-2006
| | Posted on Tuesday, April 01, 2008 - 02:20 am: |
|
need to rebuild them all and re-synce them
where are iu located? |
Kenny McFarland
New member
Username: coatiehog
Post Number: 2
Registered: 03-2008
| | Posted on Tuesday, April 01, 2008 - 05:32 pm: |
|
Just,
I am in Elizabeth City, NC. About 1 hour south of Norfolk Va. |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 3626
Registered: 09-2006
| | Posted on Wednesday, April 02, 2008 - 08:12 pm: |
|
a little too far away from my shop |
McFarland
Visitor
| | Posted on Wednesday, April 02, 2008 - 09:43 pm: |
|
I took her out for a spin today and found that it only runs rough in the first 1/8 of throttle movement. After you go past that and reach about 2200 on the tach she smooths out and runs fine. If I choke it momentarily it runs fine at low speeds. Can I remove the slow jet from outside the carb and clean it out? |
zach k
Visitor
| | Posted on Sunday, April 06, 2008 - 06:04 pm: |
|
i am having the same problem on my 04 BF75A |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 3649
Registered: 09-2006
| | Posted on Sunday, April 06, 2008 - 06:30 pm: |
|
you need to sync it!!! |
