| Author |
Message |
    
Brian Burkley
Member
Username: mibowman
Post Number: 35
Registered: 05-2007
| | Posted on Thursday, September 17, 2009 - 08:50 am: | 
|
Greetings,
My 150 ProV moves to the side while trailing. Is there a recommendation to stop this? Also need a recommendation for the covers for tilt and trim rams.
Thankyou |
Robert Graham
Advanced Member
Username: grahamr
Post Number: 113
Registered: 04-2009
| | Posted on Thursday, September 17, 2009 - 10:21 am: |
|
you need a transom saver brace between your motor and the trailer to keep motor from bouncing and moving around. I spray my tilt and trim rams/motor/pump with Yamaha Corrosion Protector or spray grease to help keep water off and prevent corrosion. Good Luck! |
Brian Burkley
Member
Username: mibowman
Post Number: 36
Registered: 05-2007
| | Posted on Thursday, September 17, 2009 - 11:15 am: |
|
Thankyou for the reply. I currently have a transom saver. I guess I miss stated the recommendation. The issue is not up and down but side to side. Is there a steering lock to stop this during transport? |
Robert Graham
Advanced Member
Username: grahamr
Post Number: 114
Registered: 04-2009
| | Posted on Thursday, September 17, 2009 - 11:21 am: |
|
my transom saver holds my motor straight, up/down, side to side, no movement at all. |
Cliff Casavant
Advanced Member
Username: chickenfry
Post Number: 126
Registered: 05-2009
| | Posted on Thursday, September 24, 2009 - 03:28 pm: |
|
a bungee cord slaved my problem
i attached it to the steering wheel during transport |
