|
| 1993? 70 hp Force Motor help with ID ... |
| Author |
Message |
    
Roger Hutson
Member
Username: banjomaniac
Post Number: 4
Registered: 04-2007
| | Posted on Tuesday, September 15, 2009 - 12:13 pm: | 
|
I just bought this motor $380 to upgrade from a 50hp omc for more power. It looks like I need something to mount the control cables to, I see 2 extra threaded studs in or near the path to the throttle and shift connections so I'm guessing a bracket or 2 is needed? Is there supposed to be a cover on the carb? And last thing, the serial number plate is gone so is there another way to determine what model serial this is like a stamp somewhere? Thanks for any help and here is a pick of the motor if it helps any.  |
Brian Brackett
Advanced Member
Username: kainon
Post Number: 934
Registered: 03-2009
| | Posted on Wednesday, September 16, 2009 - 01:37 pm: |
|
the force shift & throttle cables have very different ends then the OMC's. the cables usually goe through a swivel bracket and attach to a non moving post.
the Forces usually had a simple cover over the carbs. and the serial number plate is usually on the port side, inside the lower cover. |
|
|
