| Author |
Message |
    
lee d
Member
Username: o0wizard0o
Post Number: 4
Registered: 11-2009
| | Posted on Tuesday, November 17, 2009 - 01:34 pm: | 
|
ser no 676b 40718, not been run for 18months or so, fired up after cleaning plugs and fresh fuel, had it in a big barrell, no water flow from hole?, is this impeller or does it need messing with? help |
Noel McBride
Advanced Member
Username: haventaclue
Post Number: 352
Registered: 05-2007
| | Posted on Tuesday, November 17, 2009 - 03:04 pm: |
|
If it hasn't been run for 18 months then it's a fair bet that the impeller hasn't been changed in the last two years,so it's due a change,plus it has probably perished sitting about out of use.
When you drop the lower unit,blow some air down the tell tale or poke some strimmer line down |
Rollie Rose
Advanced Member
Username: profisher
Post Number: 561
Registered: 12-2008
| | Posted on Wednesday, November 18, 2009 - 12:31 am: |
|
lee..use a thin piece of plyable wire up the tell tale hole...if its been in the salt..it plugs there very easily. You may want to change the impeller anyway, but it may just be plugged. |
JUST-IN-TIME
Senior Member
Username: justintime
Post Number: 7131
Registered: 09-2006
| | Posted on Friday, November 20, 2009 - 04:37 am: |
|
yep clean the hole
use compressed air also |
