|
| Author |
Message |
    
Daniel Tribble
New member
Username: dtribble
Post Number: 1
Registered: 10-2009
| | Posted on Sunday, October 25, 2009 - 01:43 pm: | 
|
i have a 1996 force 9.9 motor low hours. The problem im having is it will not idle so i can change gears. It runs great at mid to high rpm. It sat for a few months so i cleaned the carb, replaced the needle and the plugs i just don't know where to start any help would be great thanks |
Noel McBride
Advanced Member
Username: haventaclue
Post Number: 331
Registered: 05-2007
| | Posted on Sunday, October 25, 2009 - 08:09 pm: |
|
Hi Daniel,you're in the wrong place,post on the Chrysler/Force forum,but at a guess turn your idle screw out another 1/2 turn or so to start with. |
|
|
