| Author |
Message |
   
Dan Gallivan
New member Username: lucky_d
Post Number: 1 Registered: 07-2009
| | Posted on Thursday, July 16, 2009 - 09:43 pm: |
|
I've looked at the year charts and can't find what year my 40 HP Mariner is. Please someone help me, I don't know what year service manual to buy. Model 40 EO Code 6e9 s Serial# 150323 Thanks for any help |
   
Graham Lamb
Senior Member Username: galamb
Post Number: 5668 Registered: 05-2007

| | Posted on Thursday, July 16, 2009 - 11:15 pm: |
|
Dan can you recheck the serial part, the 1xxxx series never got above 10xxxx. If you transposed it (105323) it will be a 1986 model. In any event, you have a 1980-something Yamaha built (for Merc) "C" model Mariner. |
   
Dan Gallivan
New member Username: lucky_d
Post Number: 2 Registered: 07-2009
| | Posted on Sunday, July 19, 2009 - 09:59 pm: |
|
I did a recheck on my serial # and it is correct. Why can't I find this number on any of the charts that I look on? Any help would be really great. |
   
Graham Lamb
Senior Member Username: galamb
Post Number: 5736 Registered: 05-2007

| | Posted on Sunday, July 19, 2009 - 11:19 pm: |
|
Ok, more diggin' and I found it. It is a late 1989 built model that would have sold as a new 1990. This was a modified "C" model that they simply referred to as the "oil injected" 40. The last 3 years of the model run they built these with full blown oil injection (pump on the powerhead) and changed the serials to 15xxxx. Seloc's never produced a manual that covered the post 1989 Yamaha built Mariners. You may have to check with Merc to see if you can get a service manual. I can't find a parts number listing for it, so you may need to find a patient dealer who will take the time to enquire. Alternately, you might find a Seloc's for Yamaha that would cover your motor. You would have to find out which manual would cover the Yamaha model 40FE with oil injection - I don't have decent enough charts to give the year range that Yami sold it under their own colours/decals, but would have been late 80's early 90's. Here's a link to the parts diagrams, part numbers and list prices... www.mercruiserparts.com/selectDocs.asp?doc_nbr=814840 |
   
Dan Gallivan
New member Username: lucky_d
Post Number: 3 Registered: 07-2009
| | Posted on Monday, July 20, 2009 - 12:29 am: |
|
Thanks Graham! I would have never found that info on my own, your awsome!!! Just hope I can track down a manual for this thing. Thanks again |
   
skidmark
New member Username: skidmark
Post Number: 2 Registered: 07-2009
| | Posted on Monday, July 20, 2009 - 10:18 pm: |
|
Hello Graham - The new GF has a pontoon with a Mariner 40 S/N OD210642 with an front-mounted oil tank. She thinks that she needs to premix, but unless that tank is for the tilt/trim system, I know why the plugs get fouled. Anyway, can you please confirm that it's a 92-93 vintage motor? I'll take the rest of my questions to the appropriate forum. Thanks! |
   
Graham Lamb
Senior Member Username: galamb
Post Number: 5763 Registered: 05-2007

| | Posted on Tuesday, July 21, 2009 - 10:34 am: |
|
Yes, it is a 1993, Merc/Mariner. And yes, it is oil injected. It has a factory set, constant ratio 50:1 oil pump. It's always a good idea, at the start of every season to run premixed gas and monitor the oil level in the tank. Once you confirm it's actually "eating oil from the system", then you are good to go. Here's a diagram of the components -
 |
   
skidmark
New member Username: skidmark
Post Number: 3 Registered: 07-2009
| | Posted on Tuesday, July 21, 2009 - 10:45 am: |
|
Thanks so much for the help! Mark |