| Author |
Message |
    
Joe Torchia
New member
Username: jtjr09
Post Number: 2
Registered: 03-2009
| | Posted on Monday, July 13, 2009 - 08:18 am: | 
|
I have a 1984 Mariner that is a Yamaha built mariner. I need to purchase a new fuel connect for connecting my hose to the outboard. Does anyone know the proper part # and manufacter for it? |
Fastjeff
Senior Member
Username: fastjeff
Post Number: 6264
Registered: 09-2003
| | Posted on Monday, July 13, 2009 - 10:11 am: |
|
If it 'looks' like a Merc connector, you can buy one at Wal MArt.
Jeff |
Graham Lamb
Senior Member
Username: galamb
Post Number: 5627
Registered: 05-2007
| | Posted on Monday, July 13, 2009 - 10:18 am: |
|
Joe, I am not aware of a part number from Merc or Yami for that.
It's a (standard) bayonette style "Yamaha" fuel line connector (fits Yamaha and numerous smaller Merc motors).
Typically available to take either 1/4" or 3/8" inch fuel line.
If you live in the U.S. or Canada, stop in any Walmart, sell for about 5 bucks...
The bayonette style for Johnson/Evinrude looks almost the same but will not fit.
 |
Joe Torchia
New member
Username: jtjr09
Post Number: 3
Registered: 03-2009
| | Posted on Monday, July 13, 2009 - 10:52 am: |
|
Thanks. One other question i need an impeller kit and a thermostat for the motor, do you know the part numbers for them. |
Graham Lamb
Senior Member
Username: galamb
Post Number: 5633
Registered: 05-2007
| | Posted on Monday, July 13, 2009 - 11:33 am: |
|
Merc stocks the parts -
99080M - thermostat (over 50 bucks) and
47-99971M - impeller (almost 60 bucks)
If you have a Yami dealer handy you can check with them. Don't have the part numbers, but can tell them you are after parts to fit a model 40 FE/FM - may be able to help you out and save you a few bucks too...
Unfortunately, the aftermarket places (like Sierra) never saw the market on these motors as "big enough" to produce parts, so you are kinda stuck with OEM... |
Joe Torchia
Member
Username: jtjr09
Post Number: 4
Registered: 03-2009
| | Posted on Monday, July 13, 2009 - 04:25 pm: |
|
So buying a water pump kit off this website for a 40hp Mariner will not be the right one? Same thing with a thermostat?? |
Graham Lamb
Senior Member
Username: galamb
Post Number: 5645
Registered: 05-2007
| | Posted on Tuesday, July 14, 2009 - 12:47 pm: |
|
It would if it was listed under the "Mariner" parts - I don't see that Andrew has a listing for an impeller for a 40C mariner on the sierra parts list. You can NOT use regular Merc parts.
Even from a Merc dealer, parts specifically for the Yami/Mariners have part numbers that most often end with an "M".
There is Merc/Mariners which are an entirely different motor.... |
