| Author |
Message |
    
dave hickman
New member
Username: cdmdave
Post Number: 1
Registered: 07-2009
| | Posted on Wednesday, July 01, 2009 - 11:17 am: | 
|
merc. 70hp. 3cyl. 98` started in morning , shut off and now no spark at plugs. is there a way to ck. the CDI box with a elect. meter to see if it is bad? |
JB
Senior Member
Username: beckerjs
Post Number: 1748
Registered: 11-2005
| | Posted on Wednesday, July 01, 2009 - 11:30 am: |
|
that requires a dva adaptor to mearsure peak voltage, cheaper to rule out the other stuff and replace switchbox last. see this post
http://www.marineengine.com/discus/messages/12479/286867.shtml |
dave hickman
New member
Username: cdmdave
Post Number: 3
Registered: 07-2009
| | Posted on Wednesday, July 01, 2009 - 11:56 am: |
|
link must be gone. is there anything i should look or check for to rule out CDI box? small hole behind prop water comes out is that right? |
JB
Senior Member
Username: beckerjs
Post Number: 1751
Registered: 11-2005
| | Posted on Wednesday, July 01, 2009 - 12:20 pm: |
|
http://cdielectronics.com/Downloads/tabid/55/language/en-US/Default.aspx
see section manuals and troubleshooting, click on troubleshooting
or go here, click on merc, it will download
http://www.maxrules.com/fixignitionspecs.html |
'Bandit
Advanced Member
Username: timebandit
Post Number: 766
Registered: 09-2007
| | Posted on Wednesday, July 01, 2009 - 06:59 pm: |
|
check the kill switch and stator first. |
dave hickman
Member
Username: cdmdave
Post Number: 4
Registered: 07-2009
| | Posted on Friday, July 03, 2009 - 09:40 pm: |
|
ohms out red wire to black and reading 2.9 when i ohms out blue wire to black no reading do you think the stator has gone bad? |
