| Author |
Message |
    
Ron
New member
Username: woodfan
Post Number: 2
Registered: 05-2008
| | Posted on Sunday, May 18, 2008 - 10:02 pm: | 
|
Mariner 75 HP. What year was it built. Ser # 0D096787. And is there any known problems with this year. Which manual will I need and where do I purchase it. This motor has not been in the water in three years but starts and spits water with a hose attached.
I'm new to this site but I love it already.
Ron |
A Waterman
Visitor
| | Posted on Sunday, May 18, 2008 - 11:41 pm: |
|
1992 |
JamesHankins
Visitor
| | Posted on Monday, May 19, 2008 - 10:44 am: |
|
Can someone tell me what year model it is . Mariner 75 h.p. 3B110483 |
Graham Lamb
Senior Member
Username: galamb
Post Number: 3190
Registered: 05-2007
| | Posted on Monday, May 19, 2008 - 01:48 pm: |
|
James, are you sure about the "3B" part - that doesn't look like a Merc/Mariner serial number... |
Graham Lamb
Senior Member
Username: galamb
Post Number: 3194
Registered: 05-2007
| | Posted on Monday, May 19, 2008 - 01:59 pm: |
|
Ron, nice motor - same powerhead as the 90 (which is still in production).
I would change the impeller, gear oil and plugs. The Selocs manual for 3 cylinder Merc's will cover your motor and give you all the maint info you need.... |
JAMESHANKINS
Visitor
| | Posted on Monday, May 19, 2008 - 03:55 pm: |
|
Lets try OB110483 ON A 75 H.P. MARINER |
Graham Lamb
Senior Member
Username: galamb
Post Number: 3198
Registered: 05-2007
| | Posted on Monday, May 19, 2008 - 05:48 pm: |
|
Ok, that's an 86 Mercury built Mariner - same model as the 90 horse so most parts are interchangeable (except the carbs). The 90 is still in production, so Merc stocks just about everything for these although I believe they increased the displacement on the powerhead during the 90's - but the compenents still fit.... |
jameshankins
Visitor
| | Posted on Monday, May 19, 2008 - 05:57 pm: |
|
Man I sure do appreciate the help . It is very hard to get the right parts if you dont know the year . Are they a good engine . It has been sitting up for a year and a half when I bought it |
Ron
New member
Username: woodfan
Post Number: 3
Registered: 05-2008
| | Posted on Monday, May 19, 2008 - 07:57 pm: |
|
Wow what a response. And I'm very grateful to those that did respond. The ser# is most definetly 0D096787. I will take your advice and hope that I may help someone else in the future.
Ron |
